As we know, lace wigs are worn by women worldwide and are in high demand. However, lace is the most delicate base material and it can be easy to tear. So there will be holes and tears in a lace wig after several usage. There’s no need to throw it, since it’s easy to repair it.
Spritz the hair using a little water and comb it through.
Turn your lace wig inside out so that the lace is facing you and you can clearly see the area you need to repair.
Clean the area that’s been ripped with acetone. Apply knot sealer, knot sealer will take about 3-5 minutes to dry. Use T-pins to pin the edges of the tear together.
Fix by stitching with thread. Locate a sturdy thread that matches the color of your lace.
Begin stitching with a straightforward overcast stitch. Keep your stitches small and near the tear so that your comb or brush will not get caught on the thread afterwards. As soon as you’ve stitched the complete tear, double knot the ribbon and cut off the excess.
Try this method when you have holes or tears in your lace wig next time, you will get your lace wig back to life. And you can find varieties of lace wigs from UniWigs.
Are you a wig wearer? Normally, your wig will get tangles after having been worn several times. Today we are going to show you how to bring your tangled wig back to life. Soak your wig.
If your wig is really tangled, you can give it a warm water soak. To do this, fill a sink with warm water and soak your wig in the water for 10-15 minutes. Saturate the tips of your wig.
Take out your spray bottle, and squirt conditioner-water onto the bottom tips of your lace wig, until the bottom 3-5 inches of the wig is fully saturated. Comb out the tips.
Using your wide-tooth comb, begin combing out the bottom 3-5 inches of the wig. Hold the hair firmly with one hand as you comb with the other hand. If the hair is quite tangled, you may need to do this in small sections, until the entire bottom of the wig is tangle-free. Continue spraying and combing.
Once the bottom 3-5 inches of the wig have been combed through, saturate the next 3-5 inches with conditioner-water, and resume combing. Continue this process until the entire wig has been combed through. Give the entire wig a final spritz with water.
If you have used quite a bit of conditioner (and especially if your wig is human hair wig), you might want to give the whole wig a spritz with clean water. Let your wig dry for several hours, combing every 30 minutes.
Leave your wig on the wig head and give it some time to dry. Every 30 minutes, give the wig a gentle comb-through. In 2-3 hours, your wig should be completely dry.
Have you learned how to detangle your wig? If you wig get tangles, try this method.
At UniWigs , we believe in everyone’s uniqueness. It is our goal to make every customer feel special and be able to design their own new look. And this is why UniWigs proudly offer 100% custom service. Simply let us know your preferences and expectations, our customer care specialist will be happy to walk you through the journey step by step. From choosing a construction, a style, a color and length of the wig, to how to apply, maintain, and care for the piece, we are here for you. https://www.youtube.com/watch?time_continue=2&v=UcHbReG17U0
How to create a unique custom wig at UniWigs?
1. Choose your favorite hair texture
We offer wave, curl and straight texture.
2. Decide the right cap construction
We provide mono top cap, skin top cap,lace front cap and full lace cap.
3.Take your unique cap- measurement
4.Determine the hair material , density, length
5.Choose the hair color from our color ring
So are you a wig wearer? Do you want to design a wig just for yourself, don’t hesitate to experience our custom human hair wigs.
As many of you know, wigs are great and affordable ways to enhance your look or hide hair loss. If it’s your first time considering buying a wig, there’s an important thing you should keep in mind is the the shape of your face, follow below tips, you will be able to select the perfect wig.
Oblong face shapes are characterized by having a very long, narrow bone structure. By choosing the right style hair, you can create the illusion of more oval face shape. Add the appearance of width and fullness at the sides by choosing a human hair wig with soft curls and waves. A fringe or half bang across the forehead as this will help shorten the appearance of your face.
People with heart shaped faces have a narrow chin and a wide forehead. Disguise the width of the forehead by adding volume at the chin and bring some hair onto the forehead. The most flattering style for a heart shaped face is a pageboy as well as lace wigs with subtle layers. Avoid short hair and choppy layers.
Square face shapes have a wide hairline and a wide jaw. Wigs that create the illusion of facial length are well suited to your face shape. Try a curly wig that is mid-length or longer.
So do you know which wig should wear depend on your face shape? There are all kinds of wigs on uniwigs.com, don’t hesitate to find the one perfect for you.
At UniWigs, we believe in everyone’s uniqueness. It is our goal to make every customer feel special and be able to design their own new look. Our custom made wigs service allows the customers to customize the most luxurious wig to fit all their desires. UniWigs provides 100% customer service starting from choosing the cap construction, the style, the color and the length of the wig, as well as instructing on how to apply, maintain, and care for the piece. Simply let us know your preferences and expectations, our customer care specialist will be happy to walk you through the journey step by step.
How to create a unique custom wig at UniWigs?
1.Choose your favorite hair texture
We provide deep weave,natural wave,body wave,natural straight,straight,kinky straight, yaki straight, jerry curl,loose curl,afro curl,body curl.
2.Decide the right cap construction
We offer hand-tied/wefted mono top cap,silk top cap,lace frontal cap,full lace cap.
3.Take your unique cap-measurement
4.Determine the hair material , density, length
We have synthetic fiber, heat friendly synthetic fiber,remy human hair and human hair blend.There are 3 density options for you choose from,130%,150%,180%, the hair length is available from 8 to 24 inches.
5.Choose the hair color from our color ring
So do you want to design your own unique hair? Contact us when you are ready to be a hair artist!
If you want synthetic wigs that look real, here you come to the right place, if you want high quality but cheap synthetic wigs, here you come to the right place too.
Marilyn Monroe classic hair style, medium length, loose wave synthetic hair wig. It features a combination of the lace front technology, which offers the most natural hairline available, The ready-to-wear synthetic hair looks and feels like natural hair. Additional features include an open cap, velvet ear tabs, and adjustable tabs for optimum comfort and fit.
The Nancy wig has a long sexy look with soft layers cascading down the back and framing the face. The extra thin lace front and mono top construction offers the most natural hair line available and creates the illusion of natural hair growth.
Donna wig by uniwigs is a gorgeous longer Kanekalon synthetic fiber wig with soft, cascading waves that fall below the shoulder. The softly blended layers give the style fluid, natural movement. Ready-to-wear synthetic hair with natural looking.
Where luxury meets tradition, The Classic Collection by UniWigsblends the craft of experienced artisans with premium materials, creating a glamorous look that’s comfortable and functional for all day wear. Keeping with the desires of women everywhere, we pick the best styles to use with our premium Remy Human Hair and ultra-comfortable caps. The result is classically brilliant style for every situation, creating memories that last a lifetime.
With a long history of development, the wig market has maintained a high degree of activity and its demand is still growing at an annual rate of 20%, which has become one of the biggest international FMCG industries. North America is the world’s largest hair consumer market, which digests 62% of the global wig product.
However, what many people do not know is that throughout the North American market, South Korea’s hair industry makes up for 90% of the market share.
It has become a veritable monopoly industry.
Factory → Wholesalers at all levels → Distributors at all levels → Terminal consumer
Over the years, the Korean wig industry has matured in the North American market with structures like this. But such a complex chain ends up with a very high terminal price which is 300%-400% of the factory price. Nevertheless, single channel coupled with a stable operating chain in South Korea for many years, the South Korean Wig industry has been standing out from others.
However, with the development of the times, especially in recent years with the rise of cross-border e-commerce, this pattern is gradually being broken.
Sectioning the hair properly is very important because it can lessen the mobility of your weave and significantly decrease the appearance of hair tracks. Visible hair tracks are not appealing and make hair look artificial. Be sure to leave some of your hair out before braiding it. The amount of hair you leave out should be kept to a minimum but be enough to hide tracks and blend well into your own hair.
To begin a sew-in weave, your natural hair must be braided. There are two braiding techniques to choose from. Both beehive and straight-back techniques are used for applying sew-in extensions. The beehive consists of your natural hair being braided in a circular direction, starting at the right outermost corner of your hair line. The straight-back technique consists of hair being evenly parted vertically.
Once hair is properly braided, loose ends should be secured. Sew the loose ends of braids into the base of braids so that they do not remain hanging. By sewing loose ends you eliminate their visibility when attaching hair extensions.
Begin to sew hair horizontally from left to right. When reaching the end of a hair extension, tie a knot to secure it. Add as many layers of extensions as you desire. The more layers you add, the thicker your hair will appear to be.
Blend your own hair into the hair extensions. If your hair is thick, consider using a flat iron to straighten your hair texture. Using a thin-tailed comb, make sure that your natural hair covers any sign of a hair extension. Feel free to style your hair any way you like. Human hair extensions can be cut, colored, permed, relaxed and curled.
Strand-bonding or “fusion” techniques have become extremely popular. Fused hair follicles are longer lasting than glue-applied extensions, but they can be equally damaging if not applied correctly. There are several ways to fuse loose hair strands. The most inexpensive way is to take small sections of hair and fuse it together using rubber band bonds. Professional fusing is normally done with adhesives, thermal bonding or cold bonding. All are methods used to fuse artificial hair to human hair follicles.
Glue-in weaves are the easiest to apply. They do not require you to know how to braid. The only major drawbacks to glued-in extensions are their damaging effects if not applied correctly. Glue can cause your hair to break. Also, if the glue is not removed properly it can cause hair loss. It is best to have someone else glue in your hair extensions. If you do it yourself, be sure to have two mirrors that allow you to see the back of your head clearly. Part hair horizontally and apply an even amount of glue along the extension track. The track of the extension will have thread in it. This will help you identify its location. Place track on the scalp and avoid getting glue onto the hair itself. If you do, don’t worry about it too much because there are glue removers available. Continue to apply extensions hair until you reach your desired level of fullness.
Drawstring weaves come in a variety of options and give women versatility. They also are not as stressful on hair follicles and can be easily removed because they do not require adhesives. The style that you can achieve using drawstrings can change day to day. Drawstring weaves are available for a variety of ponytails, buns, afros and different hair textures.
Half weaves are attached using combs, similar to those found in a traditional wig. In a half weave, “half” of your natural hair is revealed and used to cover any detection of the artificial weave piece. This weave option allows greater mobility in style. For example, you may want a swoop bang on Monday, a middle part of Tuesday and a half-up, half-down style on Wednesday.
How to create a custom weave using a weave cap, mannequin, glue and plastic wrap:
1). Place plastic wrap on the entire head of the mannequin for full coverage.
2). For extra protection, cover the plastic cap with a weave cap.
3). Glue, using the technique from section 2, step 3.
4). Cut and style hair as you desire.
5). Remove weave cap from the mannequin and allow hair extensions to dry.
Now you can wear your custom wig.
As the demand for human hair lace front wigs continues to increase in Hollywood, everyday women are becoming more intrigued because these weaves allow women to disregard their natural hair for four to six weeks.Women with damaged hair or hair loss use lace fronts to give their natural hair a restoration break. Hair growth can develop from the constant wear of lace-front wigs but hair loss around the hair edges or nape area will occur if not applied correctly.This can subsequently cause an unhealthy dependency on lace fronts weaves.
We generally recommend light density at the hairline and crown gradually increasing to medium density then medium density throughout the full lace wigs (blended well). Single hair, single knots are considered the best method of knotting producing a tiny knot for each individual hand-tied hair. Two or three individual hairs can be single knotted at one time speeding up the process to the detrimental of creating a larger knot with less aesthetically pleasing finish.
Density is hard to gauge from photos and a lot depends on your hair length, how curly it is, how dark it is, the lighting, etc. The pictures below are of a factory density book (no bleached knots here!) which contains industry standard densities of 50%, 80%, 100%, 130%, 150% and 180%. Looking at our photos page you will see how various densities look in various colors and lengths on our clients.
50% density, or “extra-light”
This is a great density on a lace base with bleached knots.
80% or “light”
Like real hair, it shows a fair amount of scalp but is also a good full young healthy head of hair.
100% or “light-to medium”
Normal density that offers light airy part, Full head of healthy hair.
130% or “medium”
This is only called medium because these names are derived from the ladies wig industry. 130% is maybe okay for a woman who wants her hair to look full and volumnious.
150% or “medium-heavy”
Nice density for a ladies wig, very full and thick, nice density for yaki textures.
180% or “heavy”
The 180% density is a common density for wig industry, many women like hair to look very full, and youthful, the 180% is nice density for woman.
Hair density is simply how many hairs are added to your hair system base. In earlier years, high density was necessary because the base materials were usually made of thicker materials and would be easily exposed if hair density were low.
More recently, with the advance of thinner base materials such as lace and thin skin, low density tends to look more natural especially with the see through look along the hairlines. You can chose different hair density in different areas of the base.
Double knots literally involve knotting hair twice to produce a double knot which provides a stronger, more robust knot. The resultant knots are however even more visible under close inspection. This is a particular problem when trying to create a natural hairline and for this reason most front hair lines should be single hair, single knotted on a flesh tone lace material.
The term hair injection refers to the method of inserting a series of hairs through a layer of polyurethane before coating the underside of the base with a single layer of liquid form polyurethane. Upon setting (or curing) the inserted hairs remain trapped between the two transparent layers.
Hair injection is a relatively new method of hair attachment, becoming increasingly popular due to its natural appearance, free of knots.
After receiving your order, we will discuss its feasibility with your technician. If there is no problem, your order will be sent to our factory. Our sales department will prepare related material, such as hair, base material and then produced by our skilled worker. Our quality controller in the factory will check its quality according to your request. Before the shipment, the QC will recheck it again.